Model
DLBB-7004
Bar weight
25 kg
Handle heights
140 mm and 190 mm

The trap bar is the most useful piece of equipment in a general-population gym, because it teaches a hinge with the load around the hips rather than in front of them. Handle height is what decides who can use it.

The DLBB-7004 has dual-height knurled handles at 140 mm and 190 mm, letting a beginner start higher and an experienced lifter drop to the lower grip for a longer pull. The frame is fully welded from 32 mm bar with a 2,100 mm overall length that accepts 450 mm diameter plates.

Handle knurl is medium with a smooth centre section, and the frame is balanced so the bar does not tip when loaded unevenly.

ModelDLBB-7004
Bar weight25 kg
Handle heights140 mm and 190 mm
Overall length2,100 mm
Loadable weight350 kg
FinishBlack powder coat, hard chrome handles
ModelDLBB-7004
ApplicationCommercial gym, sports academy
Loading typeFree weight
MaterialSteel, powder coated
MOQ10 units
Lead time25–35 days after deposit and drawing approval
Warranty12 months on frames and components
ColourCustomisable — RAL or Pantone reference
BrandingLogo plate, decal or embroidered upholstery tag

Specifications are current at the time of publication and may be revised without notice. Confirmed dimensions are issued on the order drawing before production. Packing volume is indicative — ask us for the container loading plan specific to your quantity mix.

  • Dual handle heights at 140 mm and 190 mm
  • Fully welded 32 mm bar frame, no bolted joints
  • 2,100 mm overall length — accepts 450 mm bumper plates
  • Medium knurl with a smooth centre section
  • Balanced so it does not tip when loaded unevenly
  • Sleeves take 50 mm Olympic plates, 350 kg loadable

This model is specified for the following environments:

Commercial fitness clubsSports academiesMilitary and first-responder gymsRehabilitation and physiotherapy clinics

Sizing the whole floor rather than one machine? Send a floor plan and we will propose a station count for your membership and traffic pattern.

Equipment is packed for sea freight as standard: frames foam-wrapped, panels edge-protected, hardware bagged and labelled per unit, then steel-banded onto pallets.

  • Assembled or knocked-down packing depending on model and container utilisation
  • Container loading plan issued before booking, with supervised loading photographs
  • FOB, CIF, CFR, DAP and DDP terms available — tell us the port and we will quote all of them
  • Wood packaging with IPPC heat treatment marks where required by destination

Commercial equipment earns its money over years, so our support is organised around keeping a floor running rather than closing a sale.

  • Warranty: 12 months on frames and components. Terms are confirmed in writing on the order.
  • Spare parts: cables, pulleys, bearings, pads and hardware held against every order number.
  • Documentation: assembly manual, torque table and parts diagram supplied per model.
  • Installation: remote support as standard; on-site supervision available for full fit-outs.
Barbells & Bars

Trap Bar (Hex Bar)

MODEL DLBB-7004

A 25 kg dual-height trap bar with knurled handles at two grip heights, so beginners can deadlift with a neutral spine and athletes can load heavier.

Dual handle heights at 140 mm and 190 mm
Fully welded 32 mm bar frame, no bolted joints
2,100 mm overall length — accepts 450 mm bumper plates
Medium knurl with a smooth centre section

Request a quotation

Pricing for Trap Bar (Hex Bar) — reply within one working day.

MOQ
10 units
Lead time
25–35 days after deposit and drawing approval
Please tell us your name.
Company name helps us quote accurately.
Please enter a valid email address.
Please select your country.
Please add a few details about your requirement.

Prefer email? Write to lilyliufitness@fouxfitness.com. This form is protected against automated submissions; a real person reads every message.

Also consider

Machines that pair with this one

All Barbells & Bars
Ordering

Buying questions we answer every week

Photograph the container condition before unloading where possible, and record any shortage or damage on the delivery receipt. Send us the photographs, the packing list and the container number and we will investigate against our loading records and resolve it with you directly. Loading photographs are taken specifically so this process is quick.

Yes. Every order is filed with its component list, so a cable or pad bought two years later is the same part. Cables, pulleys, bearings and pads are standardised across a platform family, which keeps stock practical. Less common components may require a production run, and we will state the lead time honestly.

Ratings are published per model and appear in the specification table on each product page — typically 250 to 500 kg for racks and presses, and 180 kg user rating for cardio. Ratings are verified in our load testing rather than estimated. If you need a rating for a structural assessment or a tender, we will supply it in writing.

Yes. We match frame powder coat and upholstery vinyl to a RAL, Pantone or physical sample, and retain the approved coupon for repeat orders. This is common for hotel and residential projects where the gym needs to read as part of the interior rather than an addition to it.

Yes, and we would rather you specified them at the same time. Flooring, storage walls, racks, mats, kettlebell sets, medicine balls, ropes, collars and attachments all ship in the same container, matched in quantity to the machines you have ordered. Buying accessories locally afterwards usually costs more and arrives in the wrong specification.

Add Trap Bar (Hex Bar) to a quotation
Next step

Add Trap Bar (Hex Bar) to a quotation

Send quantities, destination port and any branding requirements. We will confirm price, packing volume and delivery window.

WhatsApp Get a Quote